HUBS
 

GRAND NATIONAL HUBS
RECOMMENDED APPLICATIONS:
Late Models - Off-Road - Pre-Runner Trucks - Desert Runners - Road Race
 
GRAND NATIONAL STEEL HUBS

The industry standard since 1975, our Grand National Steel Front and Rear Hubs are the most
reliable hub assemblies that you can put on your car for tracks one mile or under. They are made from the same forgings as our Nextel Cup hubs with the same exacting tolerances.
Click to change image size.
FRONT
 
Click to change image size.
REAR
Features:   Benefits:
  • Forged from 4140 certified alloy steel
  • Fully CNC machined and inspected in-house
  • Standard 5 x 5" bolt circle
  • Heat treated
  • Zinc coated for durability
  • Available with or without studs
 
  • Front hubs come with 6.200 flange OD to fit all popular brake kits
  • Front hubs fit standard short track stock car spindles
  • Rear hub kits come with lightened heat treated steel drive flange
  • Rear hubs take 2.5" ID bearings
DESCRIPTION PART NO.   PRICE
Front Hub Assembly, fits Speedway Engineering spindle, 6.2" OD, with 123A studs 5306-11 call for price
6.2" OD Front Hub Only - with 123A studs 5300-4 call for price
Front Hub Assembly - fits Stock Car Products spindle (GN only), Townsend Race Car spindle 5306-11-1 $233.25
6.2" OD Front Hub Assembly drilled for ARP 300 series studs (studs not included) 5306-13 call for price
6.2" OD Front Hub Only drilled for ARP 300 series studs (studs not included) 5300-4D call for price
Rear Hub Assembly - fits Speedway Engineering and Stock Car Products Grand National housings 6001-11 L call for price
Rear Hub Assembly - fits Speedway Engineering and Stock Car Products Grand National housings 6001-11 R call for price
Rear Hub Only, fits Speedway Engineering, Stock Car Products GN housings 6001 call for price
Rear Hub Assembly - 6.2" OD, drilled for ARP 300 series studs (studs not included) 6003-10 L call for price
Rear Hub Assembly - 6.2" OD, drilled for ARP 300 series studs (studs not included) 6003-10 R call for price
Rear Hub Only - 6.2" OD, drilled for ARP 300 series studs (studs not included) 6003 call for price
Note: Front hub kits include: Hub, studs, races, bearings, seal, dust cap, spindle nut, washer & hardware.
  Rear hub kits include: Hub, drive plate, studs, races, bearings, seals, brake rotor adaptor, dust cap, lock nut, washer, o-ring, and bolts.
  Bare hubs include races and studs.
 

 
GRAND NATIONAL ALUMINUM HUBS

A very popular short track front and rear hub combination for late models or where aluminum hubs are allowed. The rand National Aluminum Hubs are strong, light weight, durable, and dependable. These come with the same heavy-duty bearings as the steel hubs. You can count on them for maximum performance every time you race.
Our Extreme duty rear hubs are specially designed for heavier vehicles with higher side loads.
Click to change image size. Click to change image size.
   
FRONT REAR
Click to change image size.
EXTREME DUTY REAR

 

Features:   Benefits:
  • High quality, heat treated billet aluminum
  • Black anodized to resist corrosion
  • Standard with seal retaining rings
  • Standard with rotor adapter mount
  • A wide variety of dust cap/wheel starts available
  • Assemblies come with Timken bearings
 
  • Rotor adapters fit all popular rotor bolt circles
  • Available in three bolt circles: - 5 x 5" - 5 X 4-3/4" - 5 x 5-1/2"
DESCRIPTION PART NO.   PRICE
Front Hub Only - fits Stock Car Products spindle (GN only) 5306 call for price
Front Hub Assembly fits Stock Car Products spindle (GN only) 5306-10-1 $265.25
Rear Hub Assembly - fits Speedway Engineering, Stock Car Products, etc. GN housings 6001-10 L call for price
Rear Hub Assembly - fits Speedway Engineering, Stock Car Products, etc. GN housings 6001-10 R call for price
Rear Hub Only - fits Speedway Engineering, Stock Car Products, etc. GN housings 6001A call for price
Rear Hub Assembly with aluminum driveplate- fits Speedway Engineering, Stock Car Products, etc. GN housings 6001A-HR-10 call for price
Rear Hub Assembly With steel driveplate- fits Speedway Engineering, Stock Car Products, etc. GN housings 6001A-HR-11 call for price
Rear Hub Only - fits Speedway Engineering, Stock Car Products, etc. GN housings 6001A-HR call for price
Note: Front hub kits include: Hub, studs, races, bearings, seal, brake rotor adaptor, dust cap, spindle nut, washer & hardware.
  Rear hub kits include: Hub, drive plate, studs, races, bearings, seals, brake rotor adaptor, dust cap, lock nut, washer, o-ring, and bolts.
  Bare hubs include races and studs.
 

SUPER SPEEDWAY HUBS
RECOMMENDED APPLICATIONS:
NASCAR - Nextel Cup - Busch Grand National - Craftsman Truck - ARCA - Grand National West

Many top Nextel Cup teams choose our Super Speedway front and rear hubs. The most widely used, most popular, and most recognized, our Super Speedway hubs have set the standard!
Click to change image size. Click to change image size.
FRONT REAR
Click to change image size.
Features:   Benefits:
  • Forged from 4140 certified alloy steel
  • CNC machined throughout and fully inspected in-house
  • Heat treated for extra strength and proper microstructure
  • Zinc coated for durability
  • Drilled and tapped for brake hat and wheel spacer attachment
  • Standard 6.2" OD Flanges drilled for ARP and other Nextel Cup studs
  • Stud set screws and seal retaining rings included
 
  • All hubs are date coded
  • Accepts all popular dust caps/wheel starts
  • Front hubs with machined stud relief available!
  • 250" INSET hubs available
  • 250" OUTSET hubs available
DESCRIPTION OFFSET PART NO.   PRICE
6.2" OD Rear Hub Only (fits Speedway Engineering or SCP housings) N/A 6002-A call for price
6.2" OD Rear Hub Assembly N/A 6002-11 A call for price
Front Hub Only-(fits SCP or Townsend spindle) Standard 5303 call for price
Front Hub with Stud Relief- (fits SCP or Townsend spindle) Standard 5303-3 call for price
Front Hub Assembly Standard 5303-10 call for price
Front Hub Assembly with Stud Relief Standard 5303-10-3 $251.50
Front Hub Only (fits SCP or Townsend spindle) .250" Inset 5303-1 call for price
Front Hub Only with Stud Relief .250" Inset 5303-1-3 $184.25
Front Hub Assembly .250" Inset 5303-10-1 $251.50
Front Hub Assembly with Stud Relief .250" Inset 5303-10-1-3 call for price
Front Hub Only(fits SCP or Townsend spindle) .250" Outset 5303-2 call for price
Front Hub Only with Stud Relief .250" Outset 5303-2-3 $184.25
Front Hub Assembly .250" Outset 5303-10-2 $251.50
Front Hub Assembly with Stud Relief .250" Outset 5303-10-2-3 call for price
Note: Front hub kits include: Hub, studs, races, bearings, seal, dust cap, spindle nut, washer & hardware.
  Rear hub kits include: Hub, light weight drive plate, races, bearings, bearing spacers, seal, dust cap, lock nut, washer, o-ring, and bolts.
  Bare hubs include races and studs.
  Studs are not included.
 

WIDE 5 HUBS
RECOMMENDED APPLICATIONS:
Late Model Dirts - Asphalt Cars - Road Race

Now the  Wide 5 Hub is even better.
The drive plate now has 5 bolts. Less weight more strength. This new drive plate is
interchangeable with other manufactures’ 5-bolt hubs and drive plates. Our high-strength, big bearing aluminum Wide 5 hubs are designed to take the punishment of asphalt stock car racing. The solid design maximizes rotational and lateral strength while keeping weight to a minimum.
Click to change image size.
FRONT
 
Click to change image size.
REAR
Features:   Benefits:
  • CNC machined and fully inspected in-house
  • High quality, heat treated A356 aluminum
  • Available with either fine or coarse thread studs
  • Bolt-on rotor adapter acts as a heat shield and allows use of all common rotors
  • Spoke design allows for large caliper brake packages
 
  • These Wide 5 hubs will not fill up with gear lube!
  • Preferred by many championship teams across America!
  • Strongest Wide 5 hub available!
DESCRIPTION PART NO.   PRICE
Wide Five Front Hub - assembly, fits Wide Five spindles 7809-10 call for price
Wide Five Hub Only 7809 call for price
WIDE 5 ACCESSORIES
Click to change image size. Click to change image size. Click to change image size.
122 83-041 5306B-W
Click to change image size. Click to change image size. Click to change image size. Click to change image size.
792A 83-074 792-5 792-5G
DESCRIPTION PART NO.   PRICE
Wide 5 front dust cap. .040" thick Aluminum 122 call for price
Hollow aluminum bolt kit for Wide 5 front dust cap 83-041 call for price
Makes any 8x7" rotor a floating rotor when used with Wilwood Dynamic Mtg. Kit part # 230-6710 5306B-W call for price
Wide Five Rear Hub Assembly fits Wide Five Floater & Quick change 7809-11 call for price
5 Lug Wide 5 drive plate Assembly 792A call for price
Bolt kit for 5 lug wide 5 drive plate 83-074 call for price
Flat steel rear dust cap 792-5 call for price
Gasket for 5 Lug Wide 5 drive plate (792A) 792-5G call for price
Note: Front hub kits include: Hub, studs, races, bearings, seal, dust cap, spindle nut, washer & hardware.
  Rear hub kits include: Hub, drive plate, studs, races, bearings, seals, brake rotor adaptor, dust cap, lock nut, washer, o-ring, and bolts.
  Specify fine or coarse thread studs.
  Bare hubs include races and studs.
 

MOD-LITE HUBS
RECOMMENDED APPLICATIONS:
Late Models - IMCA Modifieds * Pro-Stock - Goody's Dash * Entry-level (Mod Lite Floater applications)

Our IMCA approved Mod Lite Rear Hubs provide you with the most reliable and durable hub on the market today! If your track requires steel hubs, this is the lightest package available in the industry.
Click to change image size.
FRONT
 
Click to change image size.
REAR
Features:
  • Strong, lightweight forged five-lug hub
  • Heat treated and fully inspected in-house
  • Standard is steel, but also available in high-quality aluminum
  • Replaceable steel rotor adapters
  • Rotor adapters also available in aluminum
  • Fine or coarse high quality studs included
Benefits:
  • Available in three different bolt circles: 5 x 5" 5 x 4-3/4" 5 x 4-1/2"
DESCRIPTION PART NO.   PRICE
Hub Assembly 5 on 5" bolt circle 5311A-10 call for price
Hub Only 5 on 5" bolt circle 5311A call for price
Hub Assembly 5 on 4 3/4" bolt circle 5311B-10 call for price
Hub Only 5 on 4 3/4" bolt circle 5311B call for price
Hub Assembly 5 on 4 " bolt circle 5311C-10 call for price
Hub Only 5 on 4 " bolt circle 5311C call for price
Hub Assembly 5 on 5" bolt circle 5312A-10 call for price
Hub Only 5 on 5" bolt circle 5312A call for price
Hub Assembly 5 on 4 3/4" bolt circle 5312B-10 call for price
Hub Only 5 on 4 3/4" bolt circle 5312B call for price
Note: Steel Mod-lite hubs use brake rotor adaptor part number 5306B-7. ( 8 x 7" ) - Please specify 5/8" fine or 5/8" course wheel studs.
  Aluminum Mod lite hubs use a standard stock car brake rotor adaptor, 8 x 7" or 8 x 7-5/8" - Please specify 1/2 " fine, 5/8" fine, or 5/8" course wheel studs.
 

 
GM STEEL FRONT HUBS

Speedway Engineering steel GM midsize front hubs are designed specifically for divisions that have stock spindle requirements and must use steel hubs.
    Features:
Click to change image size.
 
  • Made from 4140 forgings the same as Nextel Cup hubs.
  • Fits popular #2 GM spindle ( 78-84 Cad. Coupe Deville or 94-96 Chevy. Sedan )
  • Heat treated and fully inspected in-house.
  • Fine or course high quality studs included.
  • Bolt on dust cap and seal retaining screws keep everything in place.
  • Replaceable bolt on rotor adaptors that fit all standard 8-bolt x 7 rotors Available in >5x5 and 5x4 bolt circles.
DESCRIPTION PART NO.   PRICE
Front Hub Assembly (includes hub, bearings, seal, rotor adaptor, dust cap) 5320 call for price
Front Hub only 5320-10 call for price
RECOMMENDED APPLICATIONS:
NASCAR - ARCA - Circle Track - Street Stock - Late Model - Speed Truck
 

MINI STOCK HUBS
RECOMMENDED APPLICATIONS:
Baby Grand - Pro Four - IMSA GTU - SCCA GT 3 - SCCA GT 4

Speedway Engineering's rugged, lightweight aluminum Mini Stock Front and Rear hubs provide the strength necessary for dirt and asphalt stock car racing. They are used by many championship teams for over 20 years, these are the best 4-lug hubs available on the market!
Click to change image size.
FRONT
 
Click to change image size.
REAR
Features:   Benefits:
  • CNC machined and fully inspected in-house
  • High quality, heat treated billet aluminum
  • Utilize either a standard 4 x 4-1/4" or 4 x 4-1/2" stud pattern - Other custom bolt circles are available - ask your sales rep
  • Rear hub kits include 7075 T6 heat treated aluminum drive plates
  • Front and Rear hubs feature billet dust caps
 
  • Choice of two ARP 1/2-20 stud lengths available (3" or 3.5")
  • Bolt-on aluminum rotor plate allows use of all standard rotor sizes
  • Black anodized to resist corrosion
  • Machined for rotor adapters
DESCRIPTION PART NO.   PRICE
Front Hub Assembly - fit 71-80 Pinto & P/N 5300-9 spindle pins. 4 on 4-1/4" bolt circle 5307-10-1 $196.00
Front Hub Only - fits 71-80 Pinto & P/N 5300-9 spindle pins, 4 on 4-1/4" bolt circle 5307-1 call for price
Front Hub Assembly - fits 71-80 Pinto & P/N 5300-9 spindle pins, 4 on 4-1/2" bolt circle 5307-10-2 $196.00
Front Hub Only - fits 71-80 Pinto & P/N 5300-9 spindle pins, 4 on 4-1/2" bolt circle 5307-2 call for price
Rear Hub Assembly - fits Floater & Mini Stock Quick Change, 4 on 4-1/4" bolt circle 5310A-10 call for price
Rear Hub Only - fits Floater & Mini Stock Quick Change, 4 on 4-1/4" bolt circle 5310A call for price
Rear Hub Assembly - fits Floater & Mini Stock Quick Change, 4 on 4-1/2" bolt circle 5310B-10 call for price
Rear Hub Only - , fits Floater & Mini Stock Quick Change, 4 on 4-1/2" bolt circle 5310B call for price
Note: Front hub kits include: Hub, studs, races, brake rotor adaptors, dust cap, & hardware. - Bearings and seals are not included.
  Rear hub kits include: Hub, drive plate, studs, races, bearings, seal, brake rotor adaptors, dust cap, lock nut, washer, and bolts.
  Bare hubs include races and studs.
  6 x 5-1/2" Brake rotor adaptors are standard on Mini Stock hubs. All others are special order.
 

2 INCH BEARING HUBS
RECOMMENDED APPLICATIONS:
Southwest Tour - Northwest Tour - Late Models

We don't believe in throwing away perfectly good hubs due to a bent rotor mounting flange. That's why we've created our line of 2" Bearing Hubs with bolt-on rotor adapters, drive plates and dust caps. You get the Speedway Engineering quality at a cost-effective price.
Click to change image size.
FRONT
 
Click to change image size.
REAR
Features:   Benefits:
  • Front dust cap features 5-screw design for durability and longevity
  • Scalloped front dust cap design puts more material around the screw holes to prevent cracking
  • Rear hub kits feature 7075 T6 heat treated aluminum drive plates
 
  • Replaceable bolt-on rotor adapters offer many choices for different brake systems/applications
  • Fully CNC machined and inspected In-house
  • Made from heat-treated, high-quality billet aluminum
  • Fine or coarse thread high quality studs Included
DESCRIPTION PART NO.   PRICE
Front Assembly 5315-11 call for price
Hub Only 5315 call for price
Rear Assembly 5315-10 call for price
Hub Only 5315 call for price
Drive Plate Assembly Rear (includes: Cap & Screws) 797A call for price
Front Dust Cap 798 call for price
Flat steel rear dust cap 792-5 call for price
2" bearing hub 83-416271 call for price
2" bearing hub 83-368A call for price
Seal retainer clip 83-350 call for price
8 bolt on 7.0" bolt circle 5316B-1 call for price
8 bolt on 7.62" bolt circle 5316B-2 call for price
For front hub with 12 3/16" dia. Performance friction 1 1/4" rotor 5316-PF call for price
For front hub with 11 3/4" dia. Performance friction 1 1/4" rotor 5318-PF call for price
Makes any 8x7" rotor a floating rotor when used with Wilwood Dynamic Mtg. Kit part # 230-6710 5318-W call for price
Note: This hub is a direct replacement for Howe-Vogel, Sierra, Port City, Coleman, or Winters Hubs that utilize standard 2" bearings.
 


Email: info@ptpfab.com Privacy Policy

Prices are subject to change without notice.